Select a pack size or image view.

Product No. EO-001 · Engine Oil

QN-F9 0W-20 Engine Oil for Importers

API SP · ILSAC GF-6A

ESTER FULL SYNTHETIC

Importers evaluating a 0W-20 engine oil supplier can review FLYSAK QN-F9 for API SP / ILSAC GF-6A-positioned passenger-car programmes. Confirm each vehicle application, pictured pack and current document set for the proposed order.

Recommended useGasoline passenger cars · turbocharged · direct injection

Document setTDS · SDS · Batch COA

Available packagingSelect a pictured pack to preview

Request TDS & Quote WhatsApp Us

Current documents and quotation prepared for your market within 48 hours.

Performance LevelAPI SP · ILSAC GF-6A

Viscosity / TypeQN-F9 0W-20

Recommended UseGasoline passenger cars · turbocharged · direct injection

Pack Sizes1L · 4L · 5L

PRODUCT INFORMATION

Technical detail for product selection.

QN-F9 0W-20

QN-F9 0W-20 uses a balanced ester full synthetic formulation to support fuel economy, LSPI resistance, timing-chain wear control and deposit protection in modern gasoline and hybrid powertrains.

Key benefits

ILSAC GF-6A performance adds fuel-economy and emission-system requirements to API SP gasoline-engine protection.
SAE 0W-20 viscosity profile balanced for start-up flow and operating-temperature film strength.
Detergent and dispersant system helps control sludge, varnish and piston deposits.
Antiwear and antioxidant additives support component protection throughout the specified service interval.
Designed for oil-change intervals and operating conditions defined by the vehicle manufacturer.

Typical properties

Representative values for a balanced SAE 0W-20 formulation developed around comparable products carrying the stated performance level.

Property	Test method	Unit	Typical value
Density at 15°C	ASTM D4052	g/cm³	0.845
Kinematic viscosity at 40°C	ASTM D445	mm²/s	44.5
Kinematic viscosity at 100°C	ASTM D445	mm²/s	8.4
Viscosity index	ASTM D2270	—	170
Cold cranking viscosity at -35°C	ASTM D5293	mPa·s	5,500
HTHS viscosity at 150°C	ASTM D4683	mPa·s	2.6
Flash point, COC	ASTM D92	°C	230
Pour point	ASTM D97	°C	-42
Total base number	ASTM D2896	mg KOH/g	8.4
Sulfated ash	ASTM D874	% mass	0.85
Noack volatility	ASTM D5800	% mass loss	12.5

Typical values may vary within normal manufacturing tolerances and do not constitute a sales specification. The batch Certificate of Analysis prevails where supplied.

0W-20 IMPORTER BUYER CHECKLIST

Approve the Exact 0W-20 Product, Not Just the Viscosity

QN-F9 0W-20 is the pictured API SP / ILSAC GF-6A product. A buyer comparing wholesale 0W-20 motor oil or private-label 0W-20 should confirm the vehicle requirement and exact performance claim before settling the SKU mix.

Match the Application

Record the vehicles, owner-manual viscosity and required API, ILSAC or manufacturer performance level. The same SAE grade does not make a C5, C6 and GF-6A product interchangeable.

Review the Saleable Pack

Compare the pictured 1L, 4L and 5L packs, then confirm bottle, cap, artwork language, carton and SKU quantities for the destination market.

Check Current Evidence

Request the current TDS, SDS, batch COA plan and licence evidence applicable to this exact product. Confirm claims and artwork against those records before purchase approval.

Write a Comparable RFQ

Specify destination, channel, applications, pack mix, expected quantities and documents. MOQ, availability, price and timing require a written offer for the proposed order.

Build the wider range from the engine oil catalogue; review the private-label approval process, the API licence verification guide and the hybrid engine oil buying guide before finalizing a market brief.

Request a QN-F9 0W-20 Document and Pack Proposal

PRODUCT BUYER FAQ

QN-F9 0W-20 Procurement Questions

Is QN-F9 0W-20 suitable for a hybrid vehicle?

Only when the vehicle owner's manual permits SAE 0W-20 and the stated API SP / ILSAC GF-6A performance level. A hybrid badge alone does not establish the required oil specification.

Is this the same product as a 0W-20 ACEA C5, C6 or ILSAC GF-7A oil?

No. Those are separate product profiles. Match the exact viscosity, performance category and any mandatory manufacturer requirement before substituting one 0W-20 SKU for another.

Which QN-F9 0W-20 pack sizes can an importer review?

The current product gallery pictures 1L, 4L and 5L front and back packs. Confirm the selected bottle, cap, label, carton, quantity and availability in the written quotation.

Which documents should a private-label buyer request?

Request the current TDS and SDS for the proposed SKU, the agreed batch COA route and applicable licence evidence before approving claims or artwork. Typical values on this page are not a sales specification.

REQUEST TDS & QUOTE · EO-001

QN-F9 0W-20

Tell us your market and expected quantity. We will send the current document set and a private-label proposal.

info@flysakoil.com WhatsApp +86 159 8912 6188

QN-F9 0W-20 Engine Oil for Importers